![]()
0 Comments
MicroSurvey Technical Support cannot help you determine this. Please contact your local IT or Network Support staff for further assistance as to any firewall software/firewall that may be present. Unfortunately this will not provide any further clues as to the source of the blockage however, typical sources include personal firewall software running on your workstation (like Norton Personal Security, for example), enterprise firewall software running on your local network (like Microsoft ISA Server, for example), a hardware firewall, a router with integrated firewall features, a cable or ISDN modem with integrated firewall features, or even your Internet Service Provider (or their secondary providers) may be blocking specific communication ports. This confirms that something is blocking communications between your workstation and the specified computer or server, on the specified port. ![]() The GSW Telnet Server for Windows is excellent with mobile devices in RFID, RF Terminal, Barcode scanners and other data collection and wireless environments. Or 2) You will see a connection error, something like "Could not open connection to the host on port x: Connect failed". Telnet Server For Windows 10, 8, 7 and Windows Server 2008 and up Fast. You can stop troubleshooting a connection problem. If you are still having some sort of connection errors in your application it is due to some other problem, and you should contact MicroSurvey Technical Support with further details. We are using telnet simply as a tool to test basic connectivity problems. You will not see any sort of "success" message etc, because we are not really connecting to a telnet server so there is no return message that will be displayed. This means that nothing is blocking communications between your workstation and the specified server or address, on the specified port. When troubleshooting OfficeSync (Office Manager or Job Monitor) communication errors:Īfter executing the telnet program, you will see one of two results:ġ) The command prompt screen will go blank. When troubleshooting a connection to your USB Network License Server to run a MicroSurvey product:Ĭ:\> telnet YourNetworkLicenseServer 8765 When troubleshooting the USB License Manager application to activate your MicroSurvey USB License Key:Ĭ:\> telnet 1433 Please note that the text shown in your prompt may vary, this is not important.Īt the prompt, type "telnet address port" where " address" is the IP address, computer name, or domain name you want to connect to (as appropriate), and " port" is the TCP/IP communications port you want to connect on, then press enter. This is a command prompt, similar to the old DOS operating system. It will be a black window with some white text that says something like "C:\>". ![]() Press Windows-R to open the "Run" dialog, then type "cmd" in it and press OK. It may take a couple minutes for the change to complete. You can enable it by going to Control Panel | Programs | Programs and Features | Turn Windows features on or off, and enable the "Telnet Client" option. ![]() If you are using Windows Vista or Windows 7, the Telnet Client is disabled by default. You can use Windows' Telnet Client to confirm whether or not communications are getting through to a specified server and port or not. Posted by James Johnston on 22 February 2011 09:22 AM |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |